Series Aller 1060WHITE

Mixers body is made of high-quality brass with copper content not less then 59%. Brass is the best material for producing body of mixer and characterized by strength and durability.

Combination of Nickel-chrome plating and acrylic paint. At first items pass galvanization process. Then the special tape is stuck on the surface which needs to keep chrome plating. After that acrylic paint is sprayed on the surface which is not covered by the special tape. When the paint gets dry the sticker is torn off and mixer is put into the oven for baking at a temperature between 120-180 degrees during 45-60 minutes.     

For switching water to shower or spout rotate the diverter by 90 degrees. Ceramic swing diverter is operates at zero pressure.

We use ceramic cartridges Sedal (Spain) with a diameter of 35 mm. Operational life of cartridges in WasserKRAFT mixers is about 500 000 opening-closing cycles. It means that family of four will be able to use mixers during 20 years without any restrictions.

Aerator provides a splash-free and well aerated stream and saves 10% of water consumption. We use silicone and plastic aerators Neoperl CASCADE and Neoperl HONEYCOMB.

3-spray hand shower with anti-lime system.

Flexible hose Sedal (Spain) with a length of 37cm (without rod) and connecting thread G3/8.

All WasserKRAFT mixers compliant with Russian and European standards on durability, mechanical and chemical stability which is confirmed by certificates of GOST Russia Certificate of Conformity, Hygiene Certificate.

The guarantee on mixers is valid for  5  (five) years.